Dormitory Facilities

 
Click on images to enlarge

 
Additional Possibilities with the student or labor dormitories:

1. If needed, bunk beds can be used to sleep two persons in each room.

2. Each 4-room section can be repeated in symmetrical formats creating multi section housing blocks with hallways in between. This can be built as many times as wished providing land is available.

3. Additional blocks can be added on top of the ground floor blocks. However this will require for the first floor to utilize additional steel and extra steel will be needed for the hallways and floor joists.

4. These designs with a small modification can be built as hospital rooms, factory guesthouses, and church guesthouses and as multi person housing building wherever needed.

Light gauge galvanized rust proof steel framing system: Structural light gauge steel framing components for roof trusses and wall systems.  All wall studs and tracks, clips, angles, roof hat channels, soffit framing, fascia plates, lateral bracing and required fasteners.

American shingle GABLE roofing system: OSB Sub-roofing panels, 15 lbs vapor barrier felt liner, aluminum valley flashings, drip edges to prevent rotting, attic ventilation windows all the required fasteners.

EXTERIOR WALLS: Non-combustible fiber cement panels, fiber cement joint and corner trim, necessary caulking sealers and fasteners.

INTERIOR WALLS: Sheet rock panels, joint tapes, corner beads, plaster and base boards

FLOORING: Steel frame joists, wood or concrete sub flooring.

DOORS AND WINDOWS: Solid core wood or steel front door with foam core, doorframe, dead lock and keys. Hallow core wood interior doors wherever applicable. Sliding Vinyl or aluminum windows with screens, closet doors.
FIXTURES AND APPLIANCES: Complete electrical wiring and lighting, complete plumbing, 38 x 38 shower enclosure, shower controls, shower curtain, commode with seat and seat cover, wall-hung sink, faucet, vinyl flooring, kitchen countertop, electrical cook top, kitchen sink, and kitchen faucet. (Kitchen refrigerator, stackable washer and drier is optional: additional fees apply)
HEATING, VENTILATION, AND AIR CONDITIONING (HVAC): This is an option: if required, additional charges will apply. Plug-in heating or air conditioning unit or combination unit per room.
FURNITURE: (Based on the final design and final selection of furniture pieces; quantities, thus prices may slightly vary) Standard bed frames or bunk bed frame, futon (couch/bed combination), closet or two lockers, 1 or 2 work desks, 1 or 2 chairs, mattress(es), 2 sets of sheets per bed, 2 pillows with covers per bed, 1 light cover sheet with blanket per bed.